Myths come to life at twilight

My second entry for Chocolate Baroque fits the first one, ofcourse the colours match but also the stampset is largely the same.

Daqadoes150612vr062013008

Here the flower and unicorn are decoupaged on the card. Background leaves stencils is from Designs By Ryn, stamps (lantern, and flower) are from one set of Chocolate Baroque, the unicorn is from another (discontinued?) stampset.

This is my second entry for the Chocolate Baroque Colour Challenge #11

734be-cbc_10 Daqadoes150612vr062029009

The lines of the decoupaged paper were much more visible, the glue dried up faster then I could glue it on. Usually I put the glue on the surface where the images will go, but this time I wanted as little glue on top as possible, so that meant putting the glue on the back of the image. And doing that on tissue paper without it tearing is a challenge. Then gluing it – I thought it went quite ok (the manes folded double but I managed to pull them straight without tearing it) and then I realized it wasn’t straight! argh. The unicorn should be tilted to the right a bit. Let’s just say it leans toward the lantern to light it with it’s horn.
As the lines of the tissue paper were more visible, I made use of it and even added more white around the unicorn, like it has just appeard out of thin air / out of the mist.

Below: For this card the upper left background was used.

Daqadoes150606za222308003

Daqadoes150612vr062013008

I like the somewhat dark grungy look, it does remind me of the Japanese cartoons like spirited away, like the spirit world that sometimes shines through to the earthly world. Cartoons for adults (not meaning it has got sexual content but with angry spirits etc). Twilight, the time that myths come to life.

Halloween roundup

I’ve been a bit absent lately, mostly due to focussing on getting the house ready to sell, which also means I didn’t have much time for crafting.

So now is a good time to catch up on my backlog of unposted projects!

I’ll start with 2 more hallloween ones, these were also made for the Country View Challenge Blog Guest Designer post, but in the end, I liked the  cat the most. The 4 halloween card I made are portraied here. More information about the unicorn and cat card are in my previous 2 posts.

Daqadoodles13_09_19_231887

Daqadoodles13_09_19_231480 Daqadoodles13_09_19_231785

I actually started with the card with the portrait. I thought spooky portraits, with holes where the eyes should be and a big black void behind it, being watched (If you look closely you can see little red pupils). Somehow chess fits the evil overlord or haunted castle too, so I added the chesspiece with the checkmate words. I loved making the background and almost didn’t want to cover it.

Daqadoodles13_11_04_22071 Daqadoodles13_11_04_22073 Daqadoodles13_11_04_22082

Some steps when making that card:

The final touches were ofcourse some white highlights and matting the card.

I really liked the fallen over chesspiece, so I went and made another card. It’s from the Chocolate Baroque Chess stamp set.

Daqadoodles13_09_24_004037 Daqadoodles13_09_24_003938

Daqadoodles13_09_22_235332You can see the light through the card because the background is the border of one of the other cards, which I cut out carefully. I enhanced the back by a little strip of cardstock, and then added another layer (after taking the picture). But I like this effect, I should have left it uncovered.

The shoe-stamps are from VivaLasvegastamps, and I thought they looked kind of spooky here, empty shoes on a dancefloor. The fairytale of the little red shoes, but a bit spookier. (Do you hear footsteps echo through the empty hallway, hear dancing in the ballroom while no one is there?) The branches on the side are coral stamps from Chocolate Baroque and a coral stencil, I embossed alternating in red, black, red, moving the stencil just a lottile so the colours wouldn’t blend too much. I further embossed the edge of the purple card with black. (And I had embossed the chesscastle stamp, shoes, chesspiece, just lots of embossing!)

Last, a card which I didn’t finish, I thought something ancient could be spooky too. I combined two stamps from a Chocolate Baroque stamp set, (after making the background with the very light script).  I made the scratched lines with something that was lying nearby.

Daqadoodles13_09_06_11058

Just using the tools at hand.

Daqadoodles13_09_06_11059

That’s as far as I got with this, I didn’t know where to go from there. I often don’t make a plan (which probably shows in my cards sometimes), but I go with the moment. But no moment came 😛 Maybe later, another time, I’ll know just the occasion and the way to finish this card or cut it up.

Materials used:

  • Chocolate Baroque stamp sets:
    UA5SP0366 The Art of Chess A5 (chess related stamps on first two cards)
    UA5SP0401 Steampunk Butterfly A5 (the bat and the lacey corner on the first card)
    UA4GW0145 Antiquities (Card with the car)
    UA5SP0326 Underwater Kingdom (coral branch on 2nd card)
  • Chocolate Baroque: Lady (portrait) – unknown series (was in a grabbag).
  • VivaLastvegastamps: shoes
  • Christina Renee / Prima Marketing 850029 (frame of the portrait)
  • Crafters Workshop Stencil: TCW360s 6×6 Coral.

 

 

Hallo-ween: Hello tears.

Halloween.

Hallo – ween.

In Dutch, Hallo means hello, and ween is an (old) word for “cry”. (I cry because something sad happened. The verb “crying” is “wenen” . Ween also looks like weeën, with an extra e, and which means contractions (as in, a pregnant woman being in labour).So a bit of creativity with the words, and it says: Hello tears. Or hello painfull spasms?

Anyway, it both can be applied to my first tries in making a halloween card.

I wanted a fairy scene which is brutally disturbed by evil. Or a normally fairylike scene with some sinister twists. I have unicorn stamps, and I thought of the pretty pure white of the unicorn. Do you know the movie The Dark Crystal, with a young (and not yet arrogant and strange religion worshipper) Tom Cruise? If I rememberd right, they tried to corrupt the unicorn.

This was my first theme, a corrupted unicorn. Lured into a trap by evil, having to kill and loose it’s innocense. Covered in blood, delirious with rage it traples all in it’s path. On the card I wanted to show a unicorn that is battling bats, with the light being clear before it, but turning dark with eerie faces behind it. Evil oozes from it’s skin now.

Default colours for evil are usually black and purple, so those colours where my starting points.

You’re wondering, no pictures yet? That’s right, because I want to tell the story first, as it’s prettier then the card.

I loved the background I made. Instead of cutting it to size like I planned, I left it, with the frays of dark shadows still lingering. I ripped the end of the card (which I did with each layer on that end) to give it a torn look. Left side of the card is still good, right side is not right.

I stamped bats (It’s one of the few halloween type stamps I’ve got, from the Chocolate Baroque steampunk Butterfly sheet, (the unicorn is also from Chocolate Baroque) and partially embossed the card (putting the card in the embossing folder which was a bit inked up, and press really hard with a heavy thing on the folder on the place you want the embossing. I think I used my salt-rock lamp for that.  I used the Spellbinders M-bossabilities folder Twigs and Tweets.

The ugliness came when I used glow in the dark embossing powder on it for the first time. Then, as it was ruined anyway, I tried a special effect with a skull stamp and placed that on the card as well.

Here it is in pictures:

A mask for the moon and a mask for the unicorn, and very inky fingers. See the swirls on the right? I kind of loved the look.

A mask for the moon and a mask for the unicorn, and very inky fingers. See the swirls on the right? I kind of loved the look.

Daqadoodles13_09_07_224735

Blood…

I was making a crunchy blooded bat. The other bat was made out of regular cardstock, this bat was made out of tissue paper and richly embossed with black embossing powder. And then drowned in blood.

I was making a crunchy blooded bat. The other bat was made out of regular cardstock, this bat was made out of tissue paper and richly embossed with black embossing powder. And then drowned drenched in blood.

Daqadoodles13_09_15_213552

So far so good. It was missing something though. So I though, hey! Let’s use this glow in the dark embossing powder! (I had ordered a skull stamp from De stempelwinkel which I wanted to stamp behind the unicorn, like skulls floating in that dark cloud behind it). But before I show you that, I show you the card on which it would be matted.

Daqadoodles13_09_15_220357

Beter. Lovely grunge look. Too bad I am going to cover it up.

Beter. Lovely grunge look. Too bad I am going to cover it up.

I added some blood in the bloddy spots, and darkened some parts even more.

I added some blood in the bloddy spots, and darkened some parts even more.

The contrast between the two papers wasn't high enough though, so I took tissue paper and used the other Halloween colour: orange.

I wanted to add a bit of a bright colour into the mix, so I took tissue paper and used the other Halloween colour: orange.

Somwhere before or after this I used the glow in the dark powder on the unicorn and moon. I wanted to simulate moonlight falling on it’s nose and back. I didn’t take into account the shading or fading of the light.

A good view of the left looking floating skull.

A good view of the left looking floating skull.

Daqadoodles13_09_19_232397

Here is the finished card. The tissue paper isn’t glued down, but the effect is not what I hoped, it had to look a bit more wild. I guess I should have torn it instead of cutting it.
The skulls were a bit bigger then I thought, so no room for several skulls.

You can sort of see the special effect of the skull here allready: One skull, the red and black embossed one, is looking to the left, while the glow in the dark one is staring at you. Embossing both wasn’t a good idea, as it melts together a bit.

EEEK! See what I mean about the gradient / fading? If only I had drawn smaller lines...

EEEK! See what I mean about the gradient / fading? If only I had drawn smaller lines…

 

Do you know what I’ve just realized? My workname for this project was “The Nightmare”. Well, isn’t this kind of like a nightmare for crafters, to have a good idea, and a possible good card, but which is ruined because of something stupid you nearing the finishing of the card?

My next project with the Glow in the dark powder turned out lots better! Check back the next few days for that post.

I hope you this posts was helpfull to you in preventing you from making the same mistake. Happy crafting!